S/UNI®-JET Data Sheet
Released
Register 33CH: E3 FRMR Maintenance Event Interrupt Enable
Bit
Type
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Function
FERRE
PERRE
AISDE
FERFE
Default
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
0
0
0
0
0
0
0
0
FEBEE
PTYPEE
TIMEMKE
NATUSEE
NATUSEE
The NATUSEE bit is an interrupt enable. When NATUSEE is logic one, an interrupt is
generated on the INTB output when the National Use bit (bit 12 of the frame in G.751 E3
mode) changes state. When NATUSEE is logic zero, changes in state of the National Use bit
does not cause an interrupt on INTB.
TIMEMKE
The TIMEMKE bit is an interrupt enable. When TIMEMKE is logic one, an interrupt is
generated on the INTB output when the Timing Marker bit (bit 8 of the G.832 Maintenance
and Adaptation byte) changes state after the selected persistency check is applied. When
TIMEMKE is logic zero, changes in state of the Timing Marker bit does not cause an
interrupt on INTB.
PTYPEE
The PTYPEE bit is an interrupt enable. When PTYPEE is logic one, an interrupt is generated
on the INTB output when the Payload Type bits (bits 3,4,5 of the G.832 Maintenance and
Adaptation byte) change state. When PTYPEE is logic zero, changes in state of the Payload
Type bits does not cause an interrupt on INTB.
FEBEE
The FEBEE bit is an interrupt enable. When FEBEE is logic one, an interrupt is generated on
the INTB output when the FEBE indication bit (bit 2 of the G.832 Maintenance and
Adaptation byte) changes state. When FEBEE is logic zero, changes in state of the FEBE bit
does not cause an interrupt on INTB.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-1990267, Issue 3
148
PMC [ PMC-SIERRA, INC ]
