PM7340 S/UNI-IMA-8
PRELIMINARY
INVERSE MULTIPLEXING OVER ATM
DATA SHEET
PMC-2001723
ISSUE 3
INVERSE MULTIPLEXING OVER ATM
16
A.C. TIMING CHARACTERISTICS
(TA = -40°C to +85°C, VDD = 3.3 V ± 8%)
Notes on Input Timing:
1. When a set-up time is specified between an input and a clock, the set-up time is
measured from the 50% point of the input to the 50% point of the clock.
2. When a hold time is specified between a clock and an input, the hold time is
measured from the 50% point of the clock to the 50% point of the input.
Notes on Output Timing:
1. Output timing is measured between the 50% point of the clock to the 50% point of
the output.
16.1 MICROPROCESSOR INTERFACE TIMING CHARACTERISTICS
Table 40
Symbol
Microprocessor Interface Read Access
Parameter
Min
Max
Units
ns
Address to Valid Read Set-up Time
Address to Valid Read Hold Time
Address to Latch Set-up Time
Address to Latch Hold Time
Valid Latch Pulse Width
Latch to Read Set-up
5
tSAR
tHAR
tSALR
tHALR
tVL
5
ns
5
ns
5
ns
20
0
ns
ns
tSLR
tHLR
tPRD
Latch to Read Hold
5
ns
Valid Read to Valid Data Propagation
Delay
Valid Read Negated to Output
Tristate
30
20
ns
ns
tZRD
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
303