PM73121ꢀAAL1gator II
Data Sheet
PMC-Sierra, Inc.
PMC-980620
,VVXHꢀꢁ
AAL1 SAR Processor
7.8 Receive Data Structures Descriptions
This section describes the structures used by the receive side of the AAL1gator II. For structures
that are common to both receive and transmit, refer to section 7.5 “Transmit Data Structures
Summary” on page 127.
NOTES:
•
•
•
All ports marked as “Reserved” must be initialized to 0 at initial setup. Software mod-
ifications to these locations after setup will cause incorrect operation.
All read/write port bits marked “Not used” must be written with the value 0 to main-
tain software compatibility with future versions.
All read-only port bits marked “Not used” are driven with a 0 and should be masked
off by the software to maintain compatibility with future versions.
ꢀꢃꢁ