(Preliminary) PL580-37/38/39
38MHz-320MHz Low Phase Noise VCXO
ELECTRICAL SPECIFICATIONS
1. Absolute Maximum Ratings
PARAMETERS
SYMBOL
MIN.
MAX.
UNITS
Supply Voltage
VDD
VI
4.6
VDD+0.5
VDD+0.5
150
V
Input Voltage, dc
-0.5
-0.5
-65
V
Output Voltage, dc
VO
TS
TA
TJ
V
Storage Temperature
°C
°C
°C
°C
kV
Ambient Operating Temperature*
Junction Temperature
-40
85
125
Lead Temperature (soldering, 10s)
ESD Protection, Human Body Model
260
2
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the
device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other
conditions above the operational limits noted in this specification is not implied.
* Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL grade only.
2. Crystal Specifications
PARAMETERS
SYMBOL
CONDITIONS
MIN.
TYP.
MAX.
UNITS
Crystal Resonator Frequency
FXIN
Parallel Fundamental Mode
at VCON = 0V
at VCON = 1.65V
at VCON = 3.3V
AT cut
19
40
MHz
17.7
9.5
Crystal Loading Rating
CL (xtal)
pF
5.4
Crystal Pullability
C0/C1 (xtal)
RE
250
30
-
Recommended ESR
AT cut
Ω
Note: Crystal Loading rating: The listed numbers are for the IC only. Specify the crystal for the value at VCON = 1.65V and add the PCB & package
parasitic. A round number (i.e. 12pF) can be achieved by adding external capacitors. Try to add the same value to XIN and XOUT, and please note,
that frequency pulling and oscillator gain may decrease.
3. Voltage Control Crystal Oscillator
PARAMETERS
SYMBOL
CONDITIONS
From power valid
MIN.
TYP.
MAX.
UNITS
VCXO Stabilization Time *
TVCXOSTB
10
ms
FXIN = 19 – 40MHz;
XTAL C0/C1 < 250
0V ≤ VCON ≤ 3.3V
VCXO Tuning Range
500
ppm
CLK output pullability
VCXO Tuning Characteristic
Pull range linearity
ppm
ppm/V
%
VCON=1.65V, ±1.65V
±200
150
80
10
VCON pin input impedance
VCON modulation BW
60
25
kΩ
kHz
0V ≤ VCON ≤ 3.3V, -3dB
Note: Parameters denoted with an asterisk (*) represent nominal characterization data and are not production tested to any specific limits.
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/29/05 Page 4