PixArt Imaging Inc.
ADNS-7530 Integrated Molded Lead-Frame DIP Sensor
Address: 0x3d
Shut_thr
Access: Read and Write Reset Value: 0x56
Bit
7
6
5
4
3
2
1
0
Field
Shut_thr7
Shut_thr6
Shut_thr5
Shut_thr4
Shut_thr3
Shut_thr2
Shut_thr1
Reserved
Data Type: 7-bit number
USAGE: Threshold defines the Shutter value when lifted runaway happens.
Sensor will suspect lifted runaway happens and suppress motion if (Shutter > Shut_thr[7:1]*32).
Inverse_Revision_ID
Address: 0x3e
Access: Read
Reset Value: 0xfc
Bit
7
6
5
4
3
2
1
0
Field
NRID7
NRID6
NRID5
NRID4
NRID3
NRID2
NRID1
NRID0
Data Type: Inverse 8-Bit unsigned integer
USAGE: This value is the inverse of the Revision_ID. It can be used to test the SPI port.
Inverse_Product_ID
Address: 0x3f
Access: Read
Reset Value: 0xce
Bit
7
6
5
4
3
2
1
0
Field
NPID7
NPID6
NPID5
NPID4
NPID3
NPID2
NPID1
NPID0
Data Type: Inverse 8-Bit unsigned integer
USAGE: This value is the inverse of the Product_ID. It can be used to test the SPI port.
Motion_Burst
Address: 0x42
Access: Read
Reset Value: 0x00
Bit
7
6
5
4
3
2
1
0
Field
MB7
MB6
MB5
MB4
MB3
MB2
MB1
MB0
Data Type: Various.
USAGE: Read from this register to activate burst mode. The sensor will return the data in the Motion register,
Delta_X_L, Delta_Y_L, Delta_XY_H, Squal, Shutter_Upper, Shutter_Lower and Maximum_Pixel. Reading the first 3
bytes clears the motion data. The read may be terminated anytime after Delta_X is read.
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
PixArt Imaging Inc.
E-mail: fae_service@pixart.com.tw