NCP1251
MAXIMUM RATINGS TABLE
Symbol
Rating
Value
Unit
V
V
CC
Power Supply voltage, V pin, continuous voltage
28
CC
V
Maximum DRV pin voltage when DRV in H state, transient voltage (Note 1)
Maximum voltage on low power pins CS, FB and OPP
V
+ 0.3
V
DRVtran
CC
−0.3 to 10
V
IOPP
Maximum injected negative current into the OPP pin (pin 3)
−2
mA
mA
°C/W
°C
I
Maximum continuous current into the V pin while in latch mode
3
SCR
CC
R
Thermal Resistance Junction−to−Air
Maximum Junction Temperature
360
q
JA
T
J,max
150
Storage Temperature Range
−60 to +150
°C
ESD Capability, Human Body Model (HBM), all pins
ESD Capability, Machine Model (MM)
2
kV
V
200
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The transient voltage is a voltage spike injected to DRV pin being in high state. Maximum transient duration is 100 ns.
2. This device series contains ESD protection and exceeds the following tests: Human Body Model 2000 V per Mil−Std−883, Method 3015.
Machine Model Method 200 V.
3. This device contains latch−up protection and exceeds 100 mA per JEDEC Standard JESD78.
http://onsemi.com
4
ONSEMI [ ONSEMI ]
