Integrated Functions (Continued)
4.4.2 Master/Slave Registers
ters have not been written, which allows software to ren-
der successive primitives without loading some of the
registers as outlined in Table 4-20.
When starting a BitBLT or vector operation, the graphics
pipeline registers are latched from the master registers to
the slave registers. A second BitBLT or vector operation
can then be loaded into the master registers while the first
operation is rendered. If a second BLT is pending in the
master registers, any write operations to the graphics
pipeline registers will corrupt the values of the pending
BLT. Software must prevent this from happening by check-
ing the “BLT Pending” bit in the GP_BLT_STATUS register
(GX_BASE+820Ch[2]).
4.4.3 Pattern Generation
The graphics pipeline contains hardware support for 8x8
monochrome patterns (expanded to two colors), 8x8
dither patterns (expanded to four colors), and 8x1 color
patterns. The pattern hardware, however, does not main-
tain a pattern origin, so the pattern data must be justified
before it is loaded into the GXLV processor’s registers. For
solid primitives, the pattern hardware is disabled and the
Most of the graphics pipeline registers are latched directly
from the master registers to the slave registers when
starting a new BitBLT or vector operation. Some registers,
however, use the updated slave values if the master regis-
pattern
color
is
always
sourced
from
the
GP_PAT_COLOR_0 register (GX_BASE+8110h).
Table 4-20. Graphics Pipeline Registers
Function
Master
GP_DST_XCOOR
Next X position along vector.
Master register if written, otherwise:
Unchanged slave if BLT, source mode = bitmap.
Slave + width if BLT, source mode = text glyph
GP_DST_YCOOR
Next Y position along vector.
Master register if written, otherwise:
Slave +/- height if BLT, source mode = bitmap.
Unchanged slave if BLT, source mode = text glyph.
GP_INIT_ERROR
GP_SRC_YCOOR
Master register if written, otherwise:
Initial error for the next pixel along the vector.
Master register if written, otherwise:
Slave +/- height if BLT, source mode = bitmap.
www.national.com
126
Revision 1.1
NSC [ National Semiconductor ]
