Freescale SMeCm33i3c89onductor, Inc.
D
NOTES:
A
1. DIMENSIONS ARE IN MILLIMETERS.
28
15
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
3. DIMENSIONS D AND E DO NOT INCLUDE MOLD
PROTRUSIONS.
4. MAXIMUM MOLD PROTRUSION 0.015 PER SIDE.
5. DIMENSION B DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.13 TOTAL IN EXCESS
OF B DIMENSION AT MAXIMUM MATERIAL
CONDITION.
1
14
MILLIMETERS
B
PIN 1 IDENT
DIM
A
A1
B
C
D
MIN
2.35
0.13
0.35
0.23
17.80
7.40
MAX
2.65
0.29
0.49
0.32
18.05
7.60
L
E
e
0.10
1.27 BSC
H
L
10.05
0.41
0
10.55
0.90
8
e
C
SEATING
PLANE
B
C
M
S
S
0.025
C
A
B
CASE 751F–05
ISSUE F
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee
regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product
or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do
vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer
application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not
designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or
sustain life, or for any other appl ication in which the failure of the Motorola product could create a situation where personal injury or death may occur.
Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its
officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
MOTOROLA and the Stylized M Logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their
respective owners.
© Motorola, Inc. 2002
How to reach us:
: Motorola Literature Distribution;
: Motorola Japan Ltd.; SPS, Technical Information Center, 3-20-1,
USA / EUROPE / Locations Not Listed
JAPAN
P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447
Minami-Azabu, Minato-ku, Tokyo 106-8573 Japan. 81-3-344-3569
: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre,
ASIA / PACIFIC
Technical Information Center: 1-800-521-6274
2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong.
852-26668334
: http://www.motorola.com/semiconductors
HOME PAGE
For More Information On This Product,
Go to: www.freescale.com
MC33389/D
MOTOROLA [ MOTOROLA ]
