V436516Y04V
CILETIV LESOM
6. Rated at 1.5V
10.
11.
5. If clock rising time is longer than 1 ns, a time (t
T
/2 -0.5) ns has to be added to this parameter.
7. If t
T
is longer than 1 ns, a time (t
T
-1) ns has to be added to this parameter.
8. Any time that the refresh Period has been exceeded, a minimum of two Auto (CBR) Refresh commands must be
given to “wake-up” the device.
9. Self Refresh Exit is a synchronous operation and begins on the 2nd positive clock edge after CKE returns high.
Self Refresh Exit is not complete until a time period equal to t
RC
is satisfied once the Self Refresh Exit command
is registered.
Referenced to the time which the output achieves the open circuit condition, not to output voltage levels.
t
DAL
is equivalent to t
DPL
+ t
RP
.
Package Diagram
144 Pin SODIMM
0.039
1.25
0.787
1
59
61
143
Pin 2 on Backside
3.3V
2.661
Pin 144 on Backside
0.140
NOTE:
1. All dimensions in inches.
Tolerances
±0.005
unless otherwise specified.
V436516Y04V Rev. 1.0 October 2001
9