PIC18F2450/4450
8.4
PIE Registers
The PIE registers contain the individual enable bits for
the peripheral interrupts. Due to the number of
peripheral interrupt sources, there are two Peripheral
Interrupt Enable registers (PIE1 and PIE2). When
IPEN = 0, the PEIE bit must be set to enable any of
these peripheral interrupts.
REGISTER 8-6:
PIE1: PERIPHERAL INTERRUPT ENABLE REGISTER 1
U-0
—
R/W-0
ADIE
R/W-0
RCIE
R/W-0
TXIE
U-0
—
R/W-0
R/W-0
R/W-0
CCP1IE
TMR2IE
TMR1IE
bit 7
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared x = Bit is unknown
bit 7
bit 6
Unimplemented: Read as ‘0’
ADIE: A/D Converter Interrupt Enable bit
1= Enables the A/D interrupt
0= Disables the A/D interrupt
bit 5
bit 4
RCIE: EUSART Receive Interrupt Enable bit
1= Enables the EUSART receive interrupt
0= Disables the EUSART receive interrupt
TXIE: EUSART Transmit Interrupt Enable bit
1= Enables the EUSART transmit interrupt
0= Disables the EUSART transmit interrupt
bit 3
bit 2
Unimplemented: Read as ‘0’
CCP1IE: CCP1 Interrupt Enable bit
1= Enables the CCP1 interrupt
0= Disables the CCP1 interrupt
bit 1
bit 0
TMR2IE: TMR2 to PR2 Match Interrupt Enable bit
1= Enables the TMR2 to PR2 match interrupt
0= Disables the TMR2 to PR2 match interrupt
TMR1IE: TMR1 Overflow Interrupt Enable bit
1= Enables the TMR1 overflow interrupt
0= Disables the TMR1 overflow interrupt
DS39760A-page 92
Advance Information
© 2006 Microchip Technology Inc.
MICROCHIP [ MICROCHIP ]
