PIC16C745/765
4.2.2.3
INTCON REGISTER
Note: Interrupt flag bits are set when an interrupt
condition occurs, regardless of the state of
its corresponding enable bit or the global
enable bit, GIE (INTCON<7>). User soft-
ware should ensure the appropriate inter-
rupt flag bits are clear prior to enabling an
interrupt.
The INTCON register is a readable and writable regis-
ter, which contains various enable and flag bits for the
TMR0 register overflow, RB Port change and external
RB0/INT pin interrupts.
REGISTER 4-3: INTERRUPT CONTROL REGISTER (INTCON: 10Bh, 18Bh)
R/W-0
GIE
R/W-0
PEIE
R/W-0
T0IE
R/W-0
INTE
R/W-0
RBIE
R/W-0
T0IF
R/W-0
INTF
R/W-x
RBIF
R
W
U
=
=
=
Readable bit
Writable bit
Unimplemented bit,
read as ‘0’
bit7
bit0
-n
=
Value at POR reset
bit 7:
bit 6:
bit 5:
bit 4:
bit 3:
bit 2:
bit 1:
bit 0:
GIE: Global Interrupt Enable bit
1= Enables all un-masked interrupts
0= Disables all interrupts
PEIE: Peripheral Interrupt Enable bit
1= Enables all un-masked peripheral interrupts
0= Disables all peripheral interrupts
T0IE: TMR0 Overflow Interrupt Enable bit
1= Enables the TMR0 interrupt
0= Disables the TMR0 interrupt
INTE: RB0/INT External Interrupt Enable bit
1= Enables the RB0/INT external interrupt
0= Disables the RB0/INT external interrupt
RBIE: RB Port Change Interrupt Enable bit
1= Enables the RB port change interrupt
0= Disables the RB port change interrupt
T0IF: TMR0 Overflow Interrupt Flag bit
1= TMR0 register has overflowed (must be cleared in software)
0= TMR0 register did not overflow
INTF: RB0/INT External Interrupt Flag bit
1= The RB0/INT external interrupt occurred (must be cleared in software)
0= The RB0/INT external interrupt did not occur
RBIF: RB Port Change Interrupt Flag bit
1= At least one of the RB<7:4> pins changed state (must be cleared in software)
0= None of the RB<7:4> pins have changed state
DS41124A-page 24
Advanced Information
1999 Microchip Technology Inc.