PIC16C745/765
DC Characteristics:
DC CHARACTERISTICS
PIC16C745/765 (Commercial, Industrial) (CONTINUED)
Standard Operating Conditions (unless otherwise stated)
Operating temperature
0°C ≤ TA ≤ +70°C for commercial
-40°C ≤ TA ≤ +85°C for industrial
Operating voltage VDD range as described in DC spec
Section 16.1 and Section 16.2
Param
Sym
No.
Characteristic
Min
Typ†
Max
Units
Conditions
Output Low Voltage
I/O ports
D080
D083
VOL
0.6
0.6
V
V
IOL = 8.5 mA, VDD = 4.35V,
-40°C to +85°C
OSC2/CLKOUT (EC, E4 osc mode)
IOL = 1.6 mA, VDD = 4.35V,
-40°C to +85°C
Output High Voltage
D090
D092
D150*
VOH
VOD
I/O ports (Note 3)
VDD-0.7
VDD-0.7
V
V
V
IOH = -3.0 mA, VDD = 4.35V,
-40°C to +85°C
OSC2/CLKOUT (EC osc mode)
IOH = -1.3 mA, VDD = 4.35V,
-40°C to +85°C
Open-Drain High Voltage
10.5
RA4 pin
Capacitive Loading Specs on Out-
put Pins
D100
D101
COSC2 OSC2 pin
15
50
pF In HS mode when external clock
is used to drive OSC1.
CIO
All I/O pins and OSC2 (in EC mode)
pF
CVUSB Vusb regulation capacitor
*These parameters are characterized but not tested.
.01
µF + 20%
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only and are not tested.
Note 1: In EC oscillator mode, the OSC1/CLKIN pin is a Schmitt Trigger input.
2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified levels repre-
sent normal operating conditions. Higher leakage current may be measured at different input voltages.
3: Negative current is defined as current sourced by the pin.
1999 Microchip Technology Inc.
Advanced Information
DS41124A-page 127