欢迎访问ic37.com |
会员登录 免费注册
发布采购

ATMEGA48V-10MUR 参数 Datasheet PDF下载

ATMEGA48V-10MUR图片预览
型号: ATMEGA48V-10MUR
PDF下载: 下载PDF文件 查看货源
内容描述: [IC MCU 8BIT 4KB FLASH 32VQFN]
分类和应用: 时钟微控制器外围集成电路闪存
文件页数/大小: 359 页 / 2546 K
品牌: MICROCHIP [ MICROCHIP ]
 浏览型号ATMEGA48V-10MUR的Datasheet PDF文件第98页浏览型号ATMEGA48V-10MUR的Datasheet PDF文件第99页浏览型号ATMEGA48V-10MUR的Datasheet PDF文件第100页浏览型号ATMEGA48V-10MUR的Datasheet PDF文件第101页浏览型号ATMEGA48V-10MUR的Datasheet PDF文件第103页浏览型号ATMEGA48V-10MUR的Datasheet PDF文件第104页浏览型号ATMEGA48V-10MUR的Datasheet PDF文件第105页浏览型号ATMEGA48V-10MUR的Datasheet PDF文件第106页  
12.8.2  
Timer/Counter Control Register B – TCCR0B  
Bit  
7
FOC0A  
W
6
FOC0B  
W
5
4
3
2
CS02  
R
1
CS01  
R/W  
0
0
CS00  
R/W  
0
WGM02  
TCCR0B  
Read/Write  
Initial Value  
R
0
R
0
R
0
0
0
0
• Bit 7 – FOC0A: Force Output Compare A  
The FOC0A bit is only active when the WGM bits specify a non-PWM mode.  
However, for ensuring compatibility with future devices, this bit must be set to zero when  
TCCR0B is written when operating in PWM mode. When writing a logical one to the FOC0A bit,  
an immediate Compare Match is forced on the Waveform Generation unit. The OC0A output is  
changed according to its COM0A1:0 bits setting. Note that the FOC0A bit is implemented as a  
strobe. Therefore it is the value present in the COM0A1:0 bits that determines the effect of the  
forced compare.  
A FOC0A strobe will not generate any interrupt, nor will it clear the timer in CTC mode using  
OCR0A as TOP.  
The FOC0A bit is always read as zero.  
• Bit 6 – FOC0B: Force Output Compare B  
The FOC0B bit is only active when the WGM bits specify a non-PWM mode.  
However, for ensuring compatibility with future devices, this bit must be set to zero when  
TCCR0B is written when operating in PWM mode. When writing a logical one to the FOC0B bit,  
an immediate Compare Match is forced on the Waveform Generation unit. The OC0B output is  
changed according to its COM0B1:0 bits setting. Note that the FOC0B bit is implemented as a  
strobe. Therefore it is the value present in the COM0B1:0 bits that determines the effect of the  
forced compare.  
A FOC0B strobe will not generate any interrupt, nor will it clear the timer in CTC mode using  
OCR0B as TOP.  
The FOC0B bit is always read as zero.  
• Bits 5:4 – Res: Reserved Bits  
These bits are reserved bits in the ATmega48/88/168 and will always read as zero.  
• Bit 3 – WGM02: Waveform Generation Mode  
See the description in the ”Timer/Counter Control Register A – TCCR0A” on page 99.  
• Bits 2:0 – CS02:0: Clock Select  
The three Clock Select bits select the clock source to be used by the Timer/Counter.  
102  
ATmega48/88/168  
2545E–AVR–02/05  
 复制成功!