欢迎访问ic37.com |
会员登录 免费注册
发布采购

LT8705 参数 Datasheet PDF下载

LT8705图片预览
型号: LT8705
PDF下载: 下载PDF文件 查看货源
内容描述: 80V的VIN和VOUT同步四开关降压 - 升压型DC / DC控制器 [80V VIN and VOUT Synchronous 4-Switch Buck-Boost DC/DC Controller]
分类和应用: 开关控制器
文件页数/大小: 44 页 / 569 K
品牌: Linear [ Linear ]
 浏览型号LT8705的Datasheet PDF文件第8页浏览型号LT8705的Datasheet PDF文件第9页浏览型号LT8705的Datasheet PDF文件第10页浏览型号LT8705的Datasheet PDF文件第11页浏览型号LT8705的Datasheet PDF文件第13页浏览型号LT8705的Datasheet PDF文件第14页浏览型号LT8705的Datasheet PDF文件第15页浏览型号LT8705的Datasheet PDF文件第16页  
LT8705  
(QFN/TSSOP)  
PIN FUNCTIONS  
CSPOUT (Pin 31/Pin 34): The (+) Input to the Output  
SWEN (Pin 36 QFN Only): Switch Enable Pin. Tie high  
Current Monitor Amplifier. This pin and the CSNOUT pin  
to enable switching. Ground to disable switching. Don’t  
measure the voltage across the sense resistor, R  
,
float this pin. This pin is internally tied to INTV in the  
SENSE2  
CC  
to provide the output current signals. Connect this pin  
TSSOP package.  
to V  
when not in use. See Applications Information  
OUT  
IMON_IN (Pin 38/Pin 3): Input Current Monitor Pin. The  
current out of this pin is proportional to the input current.  
See the Operation and Applications Information sections.  
section for proper use of this pin.  
CSNIN (Pin 32/Pin 36): The (–) Input to the Input Current  
Monitor Amplifier. This pin and the CSPIN pin measure  
MODE (Pin 37/Pin 2): Mode Pin. The voltage applied to  
this pin sets the operating mode of the controller. When  
the applied voltage is less than 0.4V, the forced continu-  
ous current mode is active. When this pin is allowed to  
float, Burst Mode operation is active. When the MODE pin  
voltage is higher than 2.3V, discontinuous mode is active.  
the voltage across the sense resistor, R  
, to provide  
IN  
SENSE1  
the input current signals. Connect this pin to V when not  
in use. See Applications Information section for proper  
use of this pin.  
CSPIN (Pin 33/Pin 37): The (+) Input to the Input Cur-  
rent Monitor Amplifier. Connect this pin to V when not  
IN  
GND (Pin 13, Exposed Pad Pin 39/Pin 16, Exposed Pad  
Pin 39): Ground. Tie directly to local ground plane.  
in use. See Applications Information section for proper  
use of this pin.  
V
(Pin 34/Pin 38): Main Input Supply Pin. It must be  
IN  
locally bypassed to ground.  
INTV (Pin 35/Pin 1): Internal 6.35V Regulator Output.  
CC  
MustbeconnectedtotheGATEV pin.INTV ispowered  
CC  
CC  
from EXTV when the EXTV voltage is higher than  
CC  
CC  
6.4V, otherwise INTV is powered from V . Bypass this  
CC  
IN  
pin to ground with a minimum 4.7μF ceramic capacitor.  
8705p  
12  
For more information www.linear.com/8705  
 复制成功!