256-Mbit J3 (x8/x16)
5.0
Maximum Ratings and Operating Conditions
5.1
Absolute Maximum Ratings
This datasheet contains information on new products in production. The specifications are subject
to change without notice. Verify with your local Intel Sales office that you have the latest datasheet
before finalizing a design. Absolute maximum ratings are shown in Table 4.
Warning: Stressing the device beyond the “Absolute Maximum Ratings” may cause permanent damage.
These are stress ratings only. Operation beyond the “Operating Conditions” is not recommended
and extended exposure beyond the “Operating Conditions” may affect device reliability.
Table 4. Absolute Maximum Ratings
Parameter
Maximum Rating
–40 °C to +85 °C
Temperature under Bias Extended
Storage Temperature
Voltage On Any signal
Output Short Circuit Current
NOTES:
–65 °C to +125 °C
–2.0 V to +5.0 V(1)
100 mA(2)
1. All specified voltages are with respect to GND. Minimum DC voltage is –0.5 V on input/output signals and
–0.2 V on V and V signals. During transitions, this level may undershoot to –2.0 V for periods <20
CC
PEN
ns. Maximum DC voltage on input/output signals, V , and V
is V +0.5 V which, during transitions,
CC
PEN
CC
may overshoot to V +2.0 V for periods <20 ns.
CC
2. Output shorted for no more than one second. No more than one output shorted at a time.
5.2
Operating Conditions
Table 5. Temperature and VCC Operating Conditions
Symbol
Parameter
Min
Max
Unit
Test Condition
T
Operating Temperature
–40
2.70
2.70
+85
3.60
3.60
°C
V
Ambient Temperature
A
V
V
V
Supply Voltage (2.7 V−3.6 V)
Supply Voltage (2.7 V−3.6 V)
—
—
CC
CC1
V
V
CCQ
CCQ
18
Datasheet
INTEL [ INTEL ]
