2-MBIT SmartVoltage BOOT BLOCK FAMILY
4.0 ELECTRICAL SPECIFICATIONS
E
NOTICE: This datasheet contains preliminary information on
new products in production. Do not finalize a design with
this information. Revised information will be published when
the product is available. Verify with your local Intel Sales
office that you have the latest datasheet before finalizing a
design.
4.1
Absolute Maximum Ratings*
Commercial Operating Temperature
* WARNING: Stressing the device beyond the "Absolute
Maximum Ratings" may cause permanent damage. These
are stress ratings only. Operation beyond the "Operating
Conditions" is not recommended and extended exposure
beyond the "Operating Conditions" may effect device
reliability.
During Read .............................. 0 °C to +70 °C
During Block Erase
and Word/Byte Program ............ 0 °C to +70 °C
Temperature Under Bias ....... –10 °C to +80 °C
Extended Operating Temperature
During Read .......................... –40 °C to +85 °C
During Block Erase
and Word/Byte Program ........ –40 °C to +85 °C
NOTES:
1. Operating temperature is for commercial product
defined by this specification.
Temperature Under Bias ....... –40 °C to +85 °C
Storage Temperature................. –65 °C to +125 °C
Voltage on Any Pin
2. Minimum DC voltage is –0.5 V on input/output pins.
During transitions, this level may undershoot to–2.0 V
for periods
<20 ns. Maximum DC voltage on input/output pins is
(except VCC, VPP, A9 and RP#)
with Respect to GND........... –2.0 V to +7.0 V(2)
V
V
CC + 0.5 V which, during transitions, may overshoot to
CC + 2.0 V for periods <20 ns.
Voltage on Pin RP# or Pin A9
3. Maximum DC voltage on VPP may overshoot to +14.0 V
for periods <20 ns. Maximum DC voltage on RP# or A9
may overshoot to 13.5 V for periods <20 ns.
with Respect to GND....... –2.0 V to +13.5 V(2,3)
VPP Program Voltage with Respect
to GND during Block Erase
4. Output shorted for no more than one second.No more
than one output shorted at a time.
and Word/Byte Program .. –2.0 V to +14.0 V(2,3)
VCC Supply Voltage
with Respect to GND........... –2.0 V to +7.0 V(2)
Output Short Circuit Current....................100 mA (4)
4.2
Commercial Operating Conditions
Table 10. Commercial Temperature and VCC Operating Conditions
Symbol
TA
Parameter
Notes
Min
0
Max
+70
3.6
Units
°C
Operating Temperature
VCC
3.3 V VCC Supply Voltage (± 0.3 V)
5 V VCC Supply Voltage (10%)
5 V VCC Supply Voltage (5%)
3.0
Volts
Volts
Volts
1
2
4.50
4.75
5.50
5.25
NOTES:
1. 10% VCC specifications apply to the 60 ns, 80 ns and 120 ns product versions in their standard test configuration.
2. 5% VCC specifications apply to the 60 ns version in its high-speed test configuration.
28
SEE NEW DESIGN RECOMMENDATIONS
INTEL [ INTEL ]
