Host Bridge/DRAM Controller Registers (D0:F0)
R
4.1.16
GGC—GMCH Graphics Control Register (D0:F0)
(82915G/82915GV/82915GL/82910GL GMCH only)
PCI Device:
Address Offset:
Default Value:
Access:
0
52h
0030h
R/W/L
16 bits
Size:
Bit
Access &
Default
Descriptions
15:7
6:4
Reserved
R/W/L
011b
Graphics Mode Select (GMS): This field is used to select the amount of main
memory that is pre-allocated to support the Internal Graphics device in VGA
(non-linear) and Native (linear) modes. The BIOS ensures that memory is pre-
allocated only when Internal graphics is enabled. Device 2 (IGD) does not claim
VGA cycles (memory and I/O), and the Sub-Class Code field within Device 2,
Function 0 Class Code register is 80h.
000 = No memory pre-allocated
001 = DVMT (UMA) mode, 1 MB of memory pre-allocated for frame buffer.
010 = Reserved.
011 = DVMT (UMA) mode, 8 MB of memory pre-allocated for frame buffer.
100–111 = Reserved.
NOTES:
1. This register is locked and becomes Read Only when the D_LCK bit in the
SMRAM register is set.
2. If IGD is disabled, this field should be set to 000.
3:2
1
Reserved
R/W
0b
IGD VGA Disable (IVD):
0 = Enable. Device 2 (IGD) claims VGA memory and I/O cycles, the Sub-Class
Code within Device 2 Class Code register is 00h.
1 = Disable. Device 2 (IGD) does not claim VGA cycles (Memory and I/O), and
the Sub-Class Code field within Device 2, Function 0 Class Code register is
80h.
0
Reserved
78
Datasheet
INTEL [ INTEL ]
