Host-PCI Express* Bridge Registers (D1:F0)
(Intel® 82915G/82915P/82915PL Only)
R
8.1.14
SSTS1—Secondary Status (D1:F0)
PCI Device:
Address Offset:
Default Value:
Access:
1
1Eh
00h
RO, R/W/C
16 bits
Size:
SSTS1 is a 16-bit status register that reports the occurrence of error conditions associated with
secondary side (i.e., PCI Express Graphics side) of the “virtual” PCI-PCI Bridge in the (G)MCH.
Bit
Access &
Default
Description
15
R/WC
0b
Detected Parity Error (DPE):
1 = The MCH received across the link (upstream) a Posted Write Data Poisoned
TLP (EP=1).
14
13
12
11
R/WC
0b
Received System Error (RSE):
1 = Secondary side sends an ERR_FATAL or ERR_NONFATAL message due to
an error detected by the secondary side, and the SERR Enable bit in the
Bridge Control register is 1.
R/WC
0b
Received Master Abort (RMA):
1 = Secondary Side for Type 1 Configuration Space Header Device (for requests
initiated by the Type 1 Header Device itself) receives a completion with
Unsupported Request Completion Status.
R/WC
0b
Received Target Abort (RTA):
1 = Secondary Side for Type 1 Configuration Space Header Device (for requests
initiated by the Type 1 Header Device itself) receives a completion with
Completer Abort Completion Status.
RO
0b
Signaled Target Abort (STA): Hardwired to 0. The (G)MCH does not generate
Target Aborts (the (G)MCH will never complete a request using the Completer
Abort Completion status).
10:9
8
RO
00b
DEVSELB Timing (DEVT): Hardwired to 0.
R/WC
0b
Master Data Parity Error (SMDPE).
1 = The MCH received across the link (upstream) a Read Data Completion
Poisoned TLP (EP=1).
Note: This bit can only be set when the Parity Error Enable bit in the Bridge
Control register is set.
7
RO
0b
Fast Back-to-Back (FB2B): Hardwired to 0.
6
5
Reserved
RO
0b
66/60 MHz capability (CAP66): Hardwired to 0.
4:0
Reserved
136
Datasheet
INTEL [ INTEL ]
