欢迎访问ic37.com |
会员登录 免费注册
发布采购

326769-002 参数 Datasheet PDF下载

326769-002图片预览
型号: 326769-002
PDF下载: 下载PDF文件 查看货源
内容描述: 移动第三代英特尔®科雷亚?? ¢处理器家族 [Mobile 3rd Generation Intel® Core™ Processor Family]
分类和应用:
文件页数/大小: 342 页 / 2513 K
品牌: INTEL [ INTEL ]
 浏览型号326769-002的Datasheet PDF文件第196页浏览型号326769-002的Datasheet PDF文件第197页浏览型号326769-002的Datasheet PDF文件第198页浏览型号326769-002的Datasheet PDF文件第199页浏览型号326769-002的Datasheet PDF文件第201页浏览型号326769-002的Datasheet PDF文件第202页浏览型号326769-002的Datasheet PDF文件第203页浏览型号326769-002的Datasheet PDF文件第204页  
Processor Configuration Registers  
2.10.43 SLOTSTS—Slot Status Register  
This is a PCI Express* Slot related register.  
B/D/F/Type:  
Address Offset:  
Reset Value:  
Access:  
0/6/0/PCI  
BA–BBh  
0000h  
RO, RO-V, RW1C  
16 bits  
Size:  
BIOS Optimal Default  
00h  
Reset  
Value  
RST/  
PWR  
Bit  
Access  
Description  
15:9  
RO  
0h  
Reserved (RSVD)  
Reserved for Data Link Layer State Changed (DLLSC)  
This bit is set when the value reported in the Data Link Layer Link  
Active field of the Link Status register is changed. In response to  
a Data Link Layer State Changed event, software must read the  
Data Link Layer Link Active field of the Link Status register to  
determine if the link is active before initiating configuration cycles  
to the hot plugged device.  
8
7
RO  
RO  
0b  
Uncore  
Uncore  
Reserved for Electromechanical Interlock Status (EIS)  
If an Electromechanical Interlock is implemented, this bit  
indicates the current status of the Electromechanical Interlock.  
0b  
0b  
0b  
0 = Electromechanical Interlock Disengaged  
1 = Electromechanical Interlock Engaged  
Presence Detect State (PDS)  
In band presence detect state:  
0 = Slot Empty  
1 = Card present in slot  
This bit indicates the presence of an adapter in the slot, reflected  
by the logical "OR" of the Physical Layer in-band presence detect  
mechanism and, if present, any out-of-band presence detect  
mechanism defined for the slot's corresponding form factor. The  
in-band presence detect mechanism requires that power be  
applied to an adapter for its presence to be detected.  
Consequently, form factors that require a power controller for  
hot-plug must implement a physical pin presence detect  
mechanism.  
0 = Slot Empty  
1 = Card Present in slot  
This register must be implemented on all Downstream Ports that  
implement slots. For Downstream Ports not connected to slots  
(where the Slot Implemented bit of the PCI Express Capabilities  
Register is 0b), this bit must return 1b.  
6
RO-V  
Uncore  
Note: PCI Express* Hot-Plug is not supported on the processor.  
Reserved for MRL Sensor State (MSS)  
This register reports the status of the MRL sensor if it is  
implemented.  
5
RO  
Uncore  
0 = MRL Closed  
1 = MRL Open  
200  
Datasheet, Volume 2