®
Intel ICH10 Pin States
3.
4.
5.
6.
7.
8.
Simulation data shows that these resistor values can range from 15 kΩ to 35 kΩ.
Simulation data shows that these resistor values can range from 7.5 kΩ to 16 kΩ.
Simulation data shows that these resistor values can range from 14.25 kΩ to 24.8 kΩ
Simulation data shows that these resistor values can range from 10 kΩ to 30 kΩ.
The pull-up or pull-down on this signal is only enabled at boot/reset for strapping function.
Simulation data shows that these resistor values can range from 10 kΩ to 20 kΩ. The
internal pull-up is only enabled during PLTRST# assertion.
9.
The pull-down on this signal is only enabled when in S3.
10.
11.
12.
13.
14.
The pull-up or pull-down on this signal is only enabled during reset.
The pull-up on this signal is not enabled when PCIRST# is high.
The pull-up on this signal is not enabled when PWROK is low.
Simulation data shows that these resistor values can range from 15 kΩ to 31 kΩ.
The pull-up or pull-down on this pin is only active when configured for native
GLAN_DOCK# functionality and is determined by the LAN controller.
82
Datasheet
INTEL [ INTEL ]
