XC835/836
Electrical Parameters
7) Timer 2 active current is measured with: module enabled, timer running in 8 MHz
8) MDU active current is measured with: module enabled, division operation was performed.
9) CORDIC active mode is measured with: module enabled, circular mode was selected for the calculation.
10) LEDTSCU active curent is measured with: module enabled, counter running in 8 MHz.
11) IIC active current is measured with: module enabled, performing a master transmit with the master clock
running at 400 KHz.
Data Sheet
37
V1.2, 2011-03
INFINEON [ Infineon ]
