欢迎访问ic37.com |
会员登录 免费注册
发布采购

SAE81C91 参数 Datasheet PDF下载

SAE81C91图片预览
型号: SAE81C91
PDF下载: 下载PDF文件 查看货源
内容描述: 独立的全CAN控制器 [Standalone Full-CAN Controller]
分类和应用: 控制器
文件页数/大小: 41 页 / 520 K
品牌: INFINEON [ Infineon ]
 浏览型号SAE81C91的Datasheet PDF文件第32页浏览型号SAE81C91的Datasheet PDF文件第33页浏览型号SAE81C91的Datasheet PDF文件第34页浏览型号SAE81C91的Datasheet PDF文件第35页浏览型号SAE81C91的Datasheet PDF文件第37页浏览型号SAE81C91的Datasheet PDF文件第38页浏览型号SAE81C91的Datasheet PDF文件第39页浏览型号SAE81C91的Datasheet PDF文件第40页  
SAE 81C90/91  
Absolute Maximum Ratings  
Ambient temperature under bias (TA): ..................................................................... – 40 to + 110 ˚C  
Storage temperature (TST)........................................................................................ – 50 to + 150 ˚C  
Voltage on VCC pins with respect to ground (VSS) ..................................................... – 0.5 to + 6.0 V  
Voltage on any pin with respect to ground (VSS).................................................– 0.5 to VCC + 0.5 V  
Input current on any pin during overload condition.................................................. – 10 to + 10 mA  
Absolute sum of all input currents during overload condition ............................................. |100 mA|  
Power dissipation..................................................................................................................... 0.5 W  
Note: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent  
damage to the device. This is a stress rating only and functional operation of the device at  
these or any other conditions above those indicated in the operational sections of this  
specification is not implied. Exposure to absolute maximum rating conditions for extended  
periods may affect device reliability. During overload conditions (VIN > VCC or VIN < VSS) the  
voltage on pins with respect to ground (VSS) must not exceed the values defined by the  
Absolute Maximum Ratings.  
Parameter Interpretation  
The parameters listed in the following partly represent the characteristics of the SAE 81C90/91 and  
partly its demands on the system. To aid in interpreting the parameters right, when evaluating them  
for a design, they are marked in column “Symbol”:  
DC (Device Characteristics):  
The logic of the SAE 81C90/91 will provide signals with the respective timing characteristics.  
SR (System Requirement):  
The external system must provide signals with the respective timing characteristics to the  
SAE 81C90/91.  
Semiconductor Group  
35  
 复制成功!