PEB 2091
PEF 2091
Electrical Characteristics
Note 77: Stresses above those listed under "Absolute Maximum Ratings" may
cause permanent damage to the device.
Exposure to conditions beyond those indicated in the recommended
operational conditions of this specification may affect device reliability.
This is a stress rating only and functional operation of the device under
those conditions or at any other condition beyond those indicated in the
operational conditions of this specification is not implied.
It is not implied, that more than one of those conditions can be applied
simultaneously.
8.2
Power Supply
Supply voltages
VDDD
VDDA1
VDDA2
= + 5 V ± 0.25 V
= + 5 V ± 0.25 V
= + 5 V ± 0.25 V
The maximum sinusoidal ripple on VDDA1 and VDDA2 is specified in the following figure:
1000
mV
100
40
20
10
10
20
30
80 100
Frequency/kHz
Frequency Ripple
ITD04269
Note: The supply voltage ripple in measured peak to peak
Figure 99
Maximum Sinusoidal Ripple on Supply Voltage
Semiconductor Group
263
Data Sheet 01.99
INFINEON [ Infineon ]
