High Current PN Half Bridge
BTS 7960
Block Description and Characteristics
4.2.2
Switching Times
IN
t
tdr(HS) tr(HS)
tdf(HS) tf(HS)
VOUT
90%
90%
∆VOUT
∆VOUT
10%
10%
t
Figure 5
Definition of switching times high side (Rload to GND)
IN
t
tdf(LS) tf(LS)
tr(LS)
tdr(LS)
VOUT
90%
90%
∆VOUT
∆VOUT
10%
10%
t
Figure 6
Definition of switching times low side (Rload to VS)
Due to the timing differences for the rising and the falling edge there will be a slight
difference between the length of the input pulse and the length of the output pulse. It can
be calculated using the following formulas:
• ∆tHS = (tdr(HS) + 0.5 tr(HS)) - (tdf(HS) + 0.5 tf(HS)
)
• ∆tLS = (tdf(LS) + 0.5 tf(LS)) - (tdr(LS) + 0.5 tr(LS)).
Data Sheet
10
Rev. 1.1, 2004-12-07
INFINEON [ Infineon ]
