ICS1893CF Data Sheet Rev. J - Release
Chapter 7 Management Register Set
7.1 Introduction to Management Register Set
This section explains in general terms the Management Register set discussed in this chapter. (For a
summary of the Management Register set, see Section 6.6.1, “Management Register Set Summary”.)
7.1.1 Management Register Set Outline
This section outlines the ICS1893CF Management Register set. Table 7-1 lists the ISO/IEC-specified
Management Register Set that the ICS1893CF implements.
Table 7-1. ISO/IEC-Specified Management Register Set
Register Address
Register Name
Basic / Extended
Basic
0
Control
1
Status
Basic
2,3
PHY Identifier
Extended
Extended
Extended
Extended
Extended
Extended
Extended
Extended
4
Auto-Negotiation Advertisement
Auto-Negotiation Link Partner Ability
Auto-Negotiation Expansion
5
6
7
Auto-Negotiation Next Page Transmit
Auto-Negotiation Next Page Link Partner Ability
Reserved by IEEE
8
9 through 15
16 through 31
Vendor-Specific (IDT) Registers
Table 7-2 lists the IDT-specific registers that the ICS1893CF implements. These registers enhance the
performance of the ICS1893CF and provide the Station Management entity (STA) with additional control
and status capabilities.
Table 7-2. IDT-Specific Registers
Register Address
16
Register Name
Extended Control
Basic / Extended
Extended
17
QuickPoll Detailed Status
10Base-T Operations
Extended Control 2
Reserved by IDT
Extended
18
Extended
19
Extended
20 through 31
Extended
ICS1893CF, Rev. J, 08/11/09
August, 2009
Copyright © 2009, Integrated Device Technology, Inc.
All rights reserved.
43
IDT [ INTEGRATED DEVICE TECHNOLOGY ]
