GS9060 Data Sheet
Table 3-10: Host Interface Description for Error Status Register
Register
Name
Bit
Name
Description
R/W
Default
ERROR_STATUS
Address: 01h
15-11
10
Not Used
VD_STD_ERR
Video Standard Error Flag. Set HIGH when a mismatch
between the received SMPTE352M packets and the calculated
video standard occurs.
R
0
9
8
FF_CRC_ERR
AP_CRC_ERR
Full Field CRC Error Flag. Set HIGH in SD mode when a Full
Field (FF) CRC mismatch has been detected in Field 1 or 2.
R
R
0
0
Active Picture CRC Error Flag. Set HIGH in SD mode when an
Active Picture (AP) CRC mismatch has been detected in Field
1 or 2.
7
LOCK_ERR
Lock Error Flag. Set HIGH whenever the LOCK pin is LOW
(indicating the device not correctly locked).
R
R
0
0
6
5
Not Used
CS_ERR
Luma Checksum Error Flag. Set HIGH when ancillary data
packet checksum error has been detected in the Y channel.
4-2
1
Not Used
SAV_ERR
Start of Active Video Error Flag. Set HIGH when TRS errors
are detected in either 8-bit or 10-bit TRS words. FW_EN/DIS
must be set HIGH.
R
R
0
0
0
EAV_ERR
End of Active Video Error Flag. Set HIGH when TRS errors are
detected in either 8-bit or 10-bit TRS words. FW_EN/DIS must
be set HIGH.
Table 3-11: Host Interface Description for Error Mask Register
Register
Name
Bit
Name
Description
R/W
Default
ERROR_MASK
Address: 1Ah
15-11
Not Used
10
9
VD_STD_ERR_MASK
FF_CRC_ERR_MASK
AP_CRC_ERR_MASK
LOCK_ERR_MASK
Not Used
Video Standard Error Flag Mask bit.
Full Field CRC Error Flag Mask bit.
Active Picture CRC Error Flag Mask bit.
Lock Error Flag Mask bit.
R/W
R/W
R/W
R/W
0
0
0
0
8
7
6
5
CS_ERR_MASK
Not Used
Checksum Error Flag Mask bit.
R/W
0
4-2
1
SAV_ERR_MASK
EAV_ERR_MASK
Start of Active Video Error Flag Mask bit.
End of Active Video Error Flag Mask bit.
R/W
R/W
0
0
0
22208 - 8 January 2007
43 of 61
GENNUM [ GENNUM CORPORATION ]
