Document Reference No.: FT_000327
Vinculo Development Module Datasheet Version 1.0
Clearance No.: FTDI#173
3.5 Configuration Jumpers
There are two configuration jumper links on the Vinculo.
JP1 is used to select the Vinculo power source.
JP2 is used to select the reference voltage for the ADC (U2)
1-2
JP1
JP2
Table 3.4 – Jumper Options
Vinculo is Powered from USB
host via CN3
ADC reference voltage = 3V3
2-3
Vinculo is Powered from
external 9V supply
ADC reference voltage = 5V0
Copyright © 2010 Future Technology Devices International Limited
8