Device Nomenclature
19 Device Nomenclature
Ordering information for the parts fully covered by this specification document is provided in
19.1 Nomenclature of Parts Fully Addressed by this Document
provides the Freescale part numbering nomenclature for the MPC8540. Note that the individual
part numbers correspond to a maximum processor core frequency. For available frequencies, contact your
local Freescale sales office. In addition to the processor frequency, the part numbering scheme also
includes an application modifier which may specify special application conditions. Each part number also
contains a revision code which refers to the die mask revision number.
Table 62. Part Numbering Nomenclature
MPC
Product
Code
MPC
nnnn
Part
Identifier
8540
t
Temperature
Range
1
Blank = 0 to 105°C
C = –40 to 105°C
pp
Package
2
ff(f)
Processor
Frequency
3, 4
c
Platform
Frequency
L = 333 MHz
J = 266 MHz
r
Revision Level
B = Rev. 2.0
(SVR = 0x80300020)
C = Rev. 2.1
(SVR = 0x80300021)
B = Rev. 2.0
(SVR = 0x80300020)
C = Rev. 2.1
(SVR = 0x80300021)
PX = FC-PBGA 833 = 833 MHz
VT = FC-PBGA 667 = 667 MHz
(Pb-free)
MPC
8540
Blank = 0 to 105°C
C = –40 to 105°C
PX = FC-PBGA AQ = 1.0 GHz
VT = FC-PBGA
(Pb-free)
F = 333 MHz
Notes:
1.For Temperature Range=C, Processor Frequency is limited to 667 MHz.
2.See
for more information on available package types.
3.Processor core frequencies supported by parts addressed by this specification only. Not all parts described in this
specification support all core frequencies. The core must be clocked at a minimum frequency of 400MHz. A device must
not be used beyond the core frequency or platform frequency indicated on the device.
4.Designers should use the maximum power value corresponding to the core and platform frequency grades indicated on the
device. A lower maximum power value should not be assumed for design purposes even when running at a lower
frequency.
MPC8540 Integrated Processor Hardware Specifications, Rev. 4
Freescale Semiconductor
101
FREESCALE [ FREESCALE SEMICONDUCTOR, INC ]
