Ordering Information
Appendix B
Ordering Information
The following figure provides an ordering partnumber example for the devices covered by this data book.
There are two options when ordering a device. Customers must choose between ordering either the mask-
specific partnumber or the generic / mask-independent partnumber. Ordering the mask-specific
partnumber enables the customer to specify which particular maskset they will receive whereas ordering
the generic maskset means that FSL will ship the currently preferred maskset (which may change over
time).
In either case, the marking on the device will always show the generic / mask-independent partnumber and
the mask set number.
NOTE
The mask identifier suffix and the Tape & Reel suffix are always both omitted from the
partnumber which is actually marked on the device.
For specific partnumbers to order, please contact your local sales office. The below figure illustrates the
structure of a typical mask-specific ordering number for the MC9S12P-Family devices
S 9 S12 P128 J0 M FT R
Tape & Reel:
R = Tape & Reel
No R = No Tape & Reel
Package Option:
FT = 48 QFN
LH = 64 LQFP
QK = 80 QFP
Temperature Option:
C = -40˚C to 85˚C
V = -40˚C to 105˚C
M = -40˚C to 125˚C
Maskset identifier Suffix:
First digit usually references wafer fab
Second digit usually differentiates mask rev
(This suffix is omitted in generic partnumbers)
Device Title
Controller Family
Main Memory Type:
9 = Flash
3 = ROM (if available)
Status / Partnumber type:
S or SC = Maskset specific partnumber
MC = Generic / mask-independent partnumber
P or PC = prototype status (pre qualification)
S12P-Family Reference Manual, Rev. 1.13
Freescale Semiconductor
533
FREESCALE [ Freescale ]
