ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
ELECTRICAL RATINGS
Power Supply Voltage at VSUP
Continuous (Steady-State)
V
V
V
-0.3 to 27
-0.3 to 40
SUP
SUP
Transient Voltage (Load Dump)
Logic Signals (RX, TX, MOSI, MISO, CS, SCLK, RST, WD, and INT)
Output Current VDD1
V
-0.3 to V
+ 0.3
V
A
LOG
I
DD1
Internally Limited
HS1
Voltage
V
I
-0.3 to V
+ 0.3
V
A
SUP
Output Current
Internally Limited
ESD Voltage, Human Body Model (1)
HS1, L0, L1, L2, L3
kV
V
- 4.0 to 4.0
-2.0 to 2.0
ESDH
ESDM
WUDC
All Other Pins
ESD Voltage Machine Model
V
V
All Pins Except CANH and CANL
±200
L0, L1, L2, L3
V
DC Input Voltage
DC Input Current
-0.3 to 40
-2.0 to 2.0
-100 to 100
V
mA
V
Transient Input Voltage with External Component (2)
CANL and CANH Continuous Voltage
V
-27 to 40
200
V
mA
V
CANH/L
CANL and CANH Continuous Current
I
CANH/L
CANH and CANL Transient Voltage (Load Dump) (4)
CANH and CANL Transient Voltage (5)
Logic Inputs (TX and RX)
V
V
40
TRH/L
-40 to 40
-0.5 to 6.0
-4.0 to 4.0
V
TRH/L
V
V
ESD Voltage (HBM 100 pF, 1.5 k) CANL, CANH
V
KV
ESDCH
ESD Voltage Machine Model
CANH and CANL
V
ESDCM
V
-200 to 200
Notes
1. ESD1 testing is performed in accordance with the Human Body Model (C
=100 pF, 1.5 k), the Machine Model (MM) (CZAP = 200 pF,
ZAP
RZAP = 0 Ω), and the Charge Device Model (CDM), Robotic (CZAP = 4.0pF).
2. According to ISO 7637 specification. See Table 6, page 24.
3. Load Dump test according to ISO 7637 part 1.
4. Transient test according to ISO 7637 part 1, pulses 1, 2, 3a, and 3b according to schematic in Table 17, page 35.
33989
Analog Integrated Circuit Device Data
Freescale Semiconductor
4
FREESCALE [ Freescale ]
