Freescale Semiconductor, Inc.
GENERAL RELEASE SPECIFICATION
8
2
SECTION 13
ELECTRICAL SPECIFICATIONS
3
4
13.1 Introduction
This section contains electrical and timing specifications for the MC68HC805P18.
5
6
13.2 Maximum Ratings
7
Rating
Symbol
VDD
VIN
Value
–0.3 to +7.0
Unit
V
Supply Voltage
8
Input Voltage
VSS –0.3 to VDD + 0.3
VSS –0.3 to 2 x VDD
25
V
Factory Mode (IRQ Pin Only)
Current Drain Per Pin Excluding VDD and VSS
Storage Temperature Range
NOTE: Voltages referenced to VSS
VIN
V
9
I
mA
°C
TSTG
–65 to +150
10
11
12
13
14
A
13.3 Operating Temperature Range
Rating
Symbol
Value
Unit
Operating Temperature Range
MC68HC805P18 (Standard)
MC68HC805P18 (Extended)
MC68HC805P18 (Automotive)
TL to TH
0 to +70
–40 to +85
–40 to +125
TA
°C
NOTE
16
17
18
19
20
This device contains circuitry to protect the inputs against damage
due to high static voltages or electric fields; however, it is advised
that normal precautions be taken to avoid application of any voltage
higher than maximum-rated voltages to this high-impedance circuit.
For proper operation, it is recommended that VIN and VOUT be
constrained to the range VSS ≤ (VIN or VOUT) ≤ VDD. Reliability of
operation is enhanced if unused inputs are connected to an
appropriate logic voltage level (for instance, either VSS or VDD).
ELECTRICAL SPECIFICATIONS
Rev. 1.0
For More Information On This Product,
Go to: www.freescale.com