REVISION HISTORY
REVISION HISTORY
Revision
Date
Description of Changes
•
•
Implemented Revision History page
Converted to Freescale format
03/2006
3.0
•
•
Added ROHS logo
04/2006
4.0
Added “It is recommended to disable open load circuitry in case of a permanent disconnected
load.“to the Open Load Fault (Non-Latching) paragraph
•
•
•
•
Changed 1k to 10k in the second paragraph of Ground Disconnect Protection
Added the section StandAlone mode to Typical Application
Updated Package Dimensions to Issue C
Added Thermal Addendum (Rev 2.0) to Data Sheet
•
•
Corrected part number ordering information
Modified Output Turn ON Delay Times on page 10
6/2002
9/2006
5.0
6.0
•
•
Changed status from Preliminary to Advance.
Made changes the resistive loads on the Typical Applications diagram and added a paragraph
describing the behavior of automotive lamps.
•
•
Added new thermal curves to the Thermal Addendum (Rev 2.0) on page 34
Made updates to Thermal Resistance Performance on page 35
•
Made changes to Thermal Addendum (Rev 2.0) relating to Figure 11, Table 19, Thermal
Resistance Performance, Figure 12, and Figure 13
9/2006
7.0
4/2007
1/2008
•
Added Direct Input Switching Frequency to Dynamic Electrical Characteristics Table
8.0
9.0
•
•
•
•
Updated Freescale form and style
Added section for Functional Internal Block Description
Clarified Legend in “Figure 13, Transient Thermal Resistance, on Page 36
Corrected Figure 3, Pin Numbers and Table 1 Pin Definitions for pins 2, 3, 5, & 6 Formal Name from
Serial Inputs to Parallel Inputs.
•
Changed Package drawing from 98ARL10596D to 98ART10510D.
33874
Analog Integrated Circuit Device Data
Freescale Semiconductor
37
FREESCALE [ Freescale ]
