Feature Integration Technology Inc.
Fintek
F75373
5.6 VOLT_FAULT# (Voltage Fault Signal)
When voltage leaps from the security range setting by BIOS, the warning signal VOLT_FAULT# will be activated. Shown in figure
5-16
High limit
Low limit
VOLT_FAULT#
Figure 5-16
6 Register Description
6.1
Configuration Register Index 00h
Power on default <7:0> = 01h
Bit
Name
INIT
Attribute
Description
7
R/W Set one restores power on default value to all registers except the
Serial Bus Address register. This bit clears itself since the power on
default is zero.
6
5-1
0
SOFT_PWDN
Reserved
R/W Set this bit to 1 will power down A/D converter circuit. Default is 0
RO
Read back will be 0
START
R/W A one enables startup of monitoring operations; a zero puts the part
in standby mode.
13
V0.25P