Feature Integration Technology Inc.
Fintek
F75373
To
THYST
SMI#
*
*
(pulse mode)
*
*
(level mode
active low)
*Interrupt Reset when Interrupt Status Registers are written 1
Figure 5-13
5.5.2 Voltage
SMI# interrupt for voltage is shown as figure 5-14. Voltage exceeding or going below high limit will cause an interrupt if the
previous interrupt has been reset by writing “1” all the interrupt Status Register. Voltage exceeding or going below low limit will
result in the same condition as voltage exceeding or going below high limit.
5.5.3 Fan
SMI# interrupt for fan is shown as figure 5-15 . SMI# will be asserted when the fan speed count exceeds or goes below the fan
limit (Value RAM 2Ch~2Dh, 2Eh~2Fh).
Voltage High limit
Fan Count limit
Voltage Low limit
Fan Count limit
SMI#
SMI#
*
*
*
*
(pulse mode)
(pulse mode)
(level mode)
*
*
*
*
*
*
*
*
(level mode)
*Interrupt Reset when Interrupt Status Registers are written 1
Voltage SMI# Mode
FAN SMI# Mode
Figure 5-14
Figure 5-15
12
V0.25P