F71869A
setting.
SEGE for 7-segment display. (Select by pin 5 power on
strapping)
SEGE
O18
4.5 Parallel Port
Pin No.
Pin Name
Type
PWR
Description
An active high input on this pin indicates that the printer is
selected. Refer to the description of the parallel port for
definition of this pin in ECP and EPP mode.
SLCT
INst,5v
100
3VCC
GPIO60
PE
I/OOD12t,5v
Default General Purpose IO.
An active high input on this pin indicates that the printer has
detected the end of the paper. Refer to the description of the
parallel port for the definition of this pin in ECP and EPP
mode.
INst,5v
101
102
103
3VCC
3VCC
3VCC
GPIO61
BUSY
I/OOD12t,5v
INst,5v
Default General Purpose IO.
An active high input indicates that the printer is not ready to
receive data. Refer to the description of the parallel port for
definition of this pin in ECP and EPP mode.
GPIO62
I/OOD12t,5v
Default General Purpose IO.
An active low input on this pin indicates that the printer has
received data and is ready to accept more data. Refer to the
description of the parallel port for the definition of this pin in
ECP and EPP mode.
ACK#
INst,5v
GPIO63
SLIN#
I/OOD12t,5v
Default General Purpose IO.
Output line for detection of printer selection. Refer to the
104
105
I/OOD12st,5v 3VCC description of the parallel port for the definition of this pin in
ECP and EPP mode.
Output line for the printer initialization. Refer to the
INIT#
I/OOD12st,5v
I/OOD12t,5v
description of the parallel port for the definition of this pin in
ECP and EPP mode.
3VCC
GPIO64
Default General Purpose IO.
An active low input on this pin indicates that the printer has
encountered an error condition. Refer to the description of
the parallel port for the definition of this pin in ECP and EPP
mode.
ERR#
GPIO65
AFD#
INst,5v
106
3VCC
I/OOD12t,5v
I/OOD12st,5v
Default General Purpose IO.
An active low output from this pin causes the printer to auto
feed a line after a line is printed. Refer to the description of
the parallel port for the definition of this pin in ECP and EPP
mode.
107
108
3VCC
3VCC
GPIO66
STB#
I/OOD12t,5v
I/OOD12st,5v
Default General Purpose IO.
An active low output is used to latch the parallel data into the
printer. Refer to the description of the parallel port for the
16
Oct., 2011
V0.19P
FINTEK [ FEATURE INTEGRATION TECHNOLOGY INC. ]
