EM78P510N
8-Bit Microcontrollers
Mode Selected
Description
Down-counter wills underflow once and can’t auto
reload from T1PD.
Timer 1
In this mode, period and duty of the T1CAP input pin are
measured once. This moment free running counter
stop and can’t detect a change of T1CAP edge.
Capture
PWM1
In this mode will generate one set of PWM1’s duty and
period, and then free running counter will stop.
Bit 0 (T1OC): Timer1 Output Flip-Flop Control Bit
0 : T-FF is low
1 : T-FF is high
6.2.29 Bank 2 R7 T1PD (Timer1 Period Buffer)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
PRD1[7] PRD1[6] PRD1[5] PRD1[4] PRD1[3] PRD1[2] PRD1[1] PRD1[0]
Bits 7~0 (PRD1[7]~PRD1[0]): The content of this register is a period of Timer 1.
6.2.30 Bank 2 R8 T1TD (Timer 1 Duty Buffer)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
TD1[7]
TD1[6]
TD1[5]
TD1[4]
TD1[3]
TD1[2]
TD1[1]
TD1[0]
Bits 7~0 (TD1[7]~TD1[0]): The content of this register is a duty of Timer 1.
6.2.31 Bank 2 R9 T2CR (Timer 2 Control Register)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
T2IF
T2IE
T2EN
T2MS1
T2MS0
T2P2
T2P1
T2P0
Bit 7 (T2IF): Interrupt Flag of Timer 2 Interrupt
Bit 6 (T2IE): Timer 2 Interrupt Mask Bit
0 : Disable Timer 2 interrupt
1 : Enable Timer 2 interrupt
Bit 5 (T2EN): Timer 2 Start Bit
0 : Timer 2 stop
1 : Timer 2 start
Product Specification (V0.9) 09.12.2006
(This specification is subject to change without further notice)
• 25
ELAN [ ELAN MICROELECTRONICS CORP ]
