EBD21RD4ABNA
VDD and VDDQ (power supply pins)
2.5V is applied. (VDD is for the internal circuit and VDDQ is for the output buffer.)
VDDSPD (power supply pin)
2.5V is applied (For serial EEPROM).
VSS (power supply pin)
Ground is connected.
/RESET (input pin)
LVCMOS reset input. When /RESET is low, all registers are reset and all outputs are low.
Detailed Operation Part, AC Characteristics and Timing Waveforms
Refer to the EDD5104AB, EDD5108AB datasheet (E0237E). DM pins of component device fixed to VSS level on
the module board. DIMM /CAS latency = component CL + 1 for registered type.
Preliminary Data Sheet E0273E20 (Ver. 2.0)
16
ELPIDA [ ELPIDA MEMORY ]
