欢迎访问ic37.com |
会员登录 免费注册
发布采购

DS2506S 参数 Datasheet PDF下载

DS2506S图片预览
型号: DS2506S
PDF下载: 下载PDF文件 查看货源
内容描述: 64千位只添加存储器 [64-kbit Add-Only Memory]
分类和应用: 存储内存集成电路光电二极管OTP只读存储器
文件页数/大小: 25 页 / 560 K
品牌: DALLAS [ DALLAS SEMICONDUCTOR ]
 浏览型号DS2506S的Datasheet PDF文件第11页浏览型号DS2506S的Datasheet PDF文件第12页浏览型号DS2506S的Datasheet PDF文件第13页浏览型号DS2506S的Datasheet PDF文件第14页浏览型号DS2506S的Datasheet PDF文件第16页浏览型号DS2506S的Datasheet PDF文件第17页浏览型号DS2506S的Datasheet PDF文件第18页浏览型号DS2506S的Datasheet PDF文件第19页  
DS2506  
Read ROM [33H]  
This command allows the bus master to read the DS2506’s 8-bit family code, unique 48-bit serial  
number, and 8-bit CRC. This command can be used only if there is a single DS2506 on the bus. If more  
than one slave is present on the bus, a data collision will occur when all slaves try to transmit at the same  
time (open drain will produce a wired-AND result). The resultant family code and 48-bit serial number  
will usually result in a mismatch of the CRC.  
Match ROM [55H]  
The match ROM command, followed by a 64-bit ROM sequence, allows the bus master to address a  
specific DS2506 on a multidrop bus. Only the DS2506 that exactly matches the 64-bit ROM sequence  
will respond to the subsequent memory function command. All slaves that do not match the 64-bit ROM  
sequence will wait for a reset pulse. This command can be used with a single or multiple devices on the  
bus.  
Skip ROM [CCH]  
This command can save time in a single drop bus system by allowing the bus master to access the  
memory functions without providing the 64-bit ROM code. If more than one slave is present on the bus  
and a read command is issued following the Skip ROM command, data collision will occur on the bus as  
multiple slaves transmit simultaneously (open drain pulldowns will produce a wired-AND result).  
Search ROM [F0H]  
When a system is initially brought up, the bus master might not know the number of devices on the  
1-Wire bus or their 64-bit ROM codes. The search ROM command allows the bus master to use a process  
of elimination to identify the 64-bit ROM codes of all slave devices on the bus. The ROM search process  
is the repetition of a simple 3-step routine: read a bit, read the complement of the bit, then write the  
desired value of that bit. The bus master performs this simple, 3-step routine on each bit of the ROM.  
After one complete pass, the bus master knows the contents of the ROM in one device. The remaining  
number of devices and their ROM codes may be identified by additional passes. See Chapter 5 of the  
Book of DS19xx iButton Standards for a comprehensive discussion of a ROM search, including an actual  
example.  
15 of 25