DS2152
DS2152 EXTERNAL ANALOG CONNECTIONS Figure 14-1
NOTES:
1. Resistor values are ± 1%.
2. The Rt resistors are used to protect the device from over-voltage.
3. See the Separate Application Note for details on how to construct a protected interface.
4. Either a crystal can be applied across the MCLK and XTALD pins or a TTL level clock can be
applied to just MCLK.
5. C1 and C2 should be 5 pF lower than 2 times the nominal loading capacitance of the crystal to adjust
for the input capacitance of the DS2152.
73 of 93