ES51967
6,600 Counts Auto DMM
lower range, the system will store the nonzero counts (residual current value). If the
range goes up to higher one automatically, the nonzero counts will be divided by ten.
So this function will still work well in automatic modes.
State diagram for Zero mode:
Original State
Press Zero
Press Zero > 1s
‘Zero’Active
Show DN+K - DN
Press Zero < 1s
State diagram for Zero + HOLD mode:
Original State
Press Zero
Press Zero > 1s
‘Zero’Active
Press Zero < 1s
Show DN+K - DN
Press Hold
‘Zero’ ‘Hold’Active
Stop LCD upgrading
State diagram for Zero + Max/Min + HOLD mode:
Original State
(Auto/Manual)
Push Zero
Push Zero > 1s
‘Zero’Active
Show DN+K - DN
Push Zero < 1s
Push Max/Min > 1s
Push Max/Min
‘Zero’ ‘Max’Active
‘Zero’ ‘Min’Active
〝Zero〞〝Max〞〝Min〞
blink. Current DN+K - DN
Show Max. DN+K - DN
Show Min. DN+K - DN
Push Max/Min
Push Max/Min
Push HOLD
Push HOLD
Push HOLD
〝Zero〞〝, Max〞〝, Min〞,
〝H〞blink. Hold the
current DN+K - DN
‘Zero’ ‘Max’ ‘Hold’
active Hold Max.
‘Zero’ ‘Min’ ‘Hold’
active Hold Min.
Push Max/Min
Push Max/Min
DN+K - DN Value
DN+K - DN Value
Push Max/Min
V2.6
20
08/10/06
CYRUSTEK [ Cyrustek corporation ]
