ES51967
6,600 Counts Auto DMM
3.4 REL + HOLD
In REL mode, the LCD panel displays DN+K - DN, where N = 1, 2, 3, … , DN is the last
value before REL is pushed, and DN+K is the current value. The meter returns to normal
operation if REL is pressed again. Pressing HOLD in REL mode makes the meter stop
updating the LCD panel.
push REL
push HOLD
Original State
(Auto/Manual)
〝REL〞active.
〝REL〞and〝H〞active.
The relative value
Hold the relative value
push REL
push HOLD
Note: It’s possible that the relative value exceeds 6,600 or –6,600 counts, but never
exceeds 9,999 or –9,999 counts. Such relative values are displayed. The LCD shows
OL in REL mode only if DN or DN+K is more than 6,600 counts or the relative value is
more than 9,999.
3.5 Max/Min + HOLD
The meter displays the maximum or minimum value of the input in Max/Min mode.
When Max/Min is pressed for the first time, the meter displays the maximum value.
The meter displays the minimum value, when it is pressed again. When Max/Min is
pressed for the third time, the meter displays current value. The meter returns to normal
operation if Max/Min is pressed and held for longer than one second. Pressing HOLD
in Max/Min mode makes the meter stop updating the maximum or the minimum value.
1 push<1s
1 push>1s
1push<1s
Original state
(Automatic/manual)
1 push>1 sec
1 push>1 sec
1push<1s
“MIN” active
min value
“Max” “MIN” blink
current value
“MAX” active
max value
1push<1s
Push HOLD
Push HOLD
Push HOLD
“MAX”“MIN” “H” blink
hold current value.
“MIN” “H” active
hold min value.
“MAX” “H” active
hold max value.
1push<1s
1push<1s
1push<1s
V2.6
18
08/10/06
CYRUSTEK [ Cyrustek corporation ]
