SL811HS
Document Title: SL811HS USB Host/Slave Controllers Hardware Specification
Document Number: 38-08008
Issue
Date
Orig. of
Change
REV.
**
ECN NO.
110850
112687
Description of Change
12/14/01
03/22/02
BHA
MUL
Converted to Cypress format from ScanLogic
*A
1) Changed power supply voltage to 4.0V in section 7.1
2) Changed value of twdsu in section 7.6.2
3) Changed max. power supply voltage to 3.45 V in section 7.2
4) Changed accuracy of adjustment in section 7.2
5) Changed bits 0 and 1 to reserved in section 5.3.8
6) Changed bit 2 to reserved in section 5.3.5 and 5.3.7
7) Changed bit 2 to reserved in section 5.3.1
8) Changed definition of bit 6 in section 5.3.5 & 5.3.7
9) Added section 5.1, Register Values on Power-up and Reset
10) Changed bit description notes in section 5.3.7
11) Changed note about series termination resistors in section 7.5
12) Changed example in section 5.3.9
13) Changed J-K Programming States table in section 5.3.2
14) Added and removed comments for low-power modes in section 5.3.4
15) Removed sections specific to slave operation and SL11H
16) Removed duplicate tables
17) General formatting changes to section headings
18) Fixed all part number references
19) Added comments to section 7.5 and new definitions to section 2.0
Document #: 38-08008 Rev. *A
Page 29 of 29
CYPRESS [ CYPRESS ]
