SL811HS
Document History Page
Document Title: SL811HS Embedded USB Host/Slave Controller
Document Number: 38-08008
Submission Orig. of
Revision
ECN
Description of Change
Date
Change
**
110850
112687
12/14/01
03/22/02
BHA
Converted to Cypress format from ScanLogic
*A
MUL
1) Changed power supply voltage to 4.0 V in section 7.1
2) Changed value of twdsu in section 7.6.2
3) Changed max. power supply voltage to 3.45 V in section 7.2
4) Changed accuracy of adjustment in section 7.2
5) Changed bits 0 and 1 to reserved in section 5.3.8
6) Changed bit 2 to reserved in section 5.3.5 and 5.3.7
7) Changed bit 2 to reserved in section 5.3.1
8) Changed definition of bit 6 in section 5.3.5 & 5.3.7
9) Added section 5.1, Register Values on Power-up and Reset
10) Changed bit description notes in section 5.3.7
11) Changed note about series termination resistors in section 7.5
12) Changed example in section 5.3.9
13) Changed J-K Programming States table in section 5.3.2
14) Added and removed comments for low-power modes in section 5.3.4
15) Removed sections specific to slave operation and SL11H
16) Removed duplicate tables
17) General formatting changes to section headings
18) Fixed all part number references
19) Added comments to section 7.5 and new definitions to section 2.0
*B
*C
381894
464641
See ECN
See ECN
VCS
ARI
Went from single column to 2-column format. Combined information from
SL811HS (38-08008) and SL811S/T (83-08009)
Added lead free part numbers to new section Ordering Information and
corrected references made to these parts. Corrected grammar. Added
compliance statement in section USB Host Transceiver Characteristics.
*D
749518
See ECN
ARI
Implemented the new template. Changed Figure 4. Labels on pins 2 and 3 were
swapped; this has been corrected.
Combined the 48-pin TQFP AXC Pin Assignment and Definition table with the
28-pin PLCC Pin Assignment and Definition table. Removed all instances of
SL811HST-AC. Corrected the variables. Removed references to the obsolete
SL11H.
*E
*F
2914091
3202147
04/15/2010
03/22/11
VRD
ODC
Removed inactive parts from Ordering Information.
Updated Packaging Information.
Template and style updates.
Added ordering code definitions, acroyms and units of measure.
Updated table titles and references.
Removed all references to 28-pin PLCC Package information as the package
is no longer offered.
Removed figure “Package Markings (28-pin PLCC)” on page 21 as it refers the
PLCC package.
Removed figure “48-Pin TQFP Mechanical Dimensions” as this is a duplicate
of the Package diagram later in the spec on page 31.
Document 38-08008 Rev. *F
Page 31 of 32
[+] Feedback
CYPRESS [ CYPRESS ]
