BMA253
Data sheet
Page 70
Register 0x1A (INT_MAP_1)
Controls which interrupt signals are mapped to the INT1 and INT2 pins.
Name
Bit
0x1A
7
INT_MAP_1
6
5
4
Read/Write R/W
R/W
0
R/W
0
R/W
0
Reset
0
Value
Content
int2_data
3
int2_fwm
int2_ffull
reserved
Bit
2
1
0
Read/Write R/W
R/W
0
R/W
0
R/W
0
Reset
0
Value
Content
reserved
int1_ffull
int1_fwm
int1_data
int2_data:
int2_fwm:
int2_ffull:
reserved:
int1_ffull:
int1_fwm:
int1_data:
map data ready interrupt to INT2 pin: ‘0’disabled, or ‘1’ enabled
map FIFO watermark interrupt to INT2 pin: ‘0’disabled, or ‘1’ enabled
map FIFO full interrupt to INT2 pin: ‘0’disabled, or ‘1’ enabled
write ‘0’
map FIFO full interrupt to INT1 pin: ‘0’disabled, or ‘1’ enabled
map FIFO watermark interrupt to INT1 pin: ‘0’disabled, or ‘1’ enabled
map data ready interrupt to INT1 pin: ‘0’disabled, or ‘1’ enabled
BST-BMA253-DS000-01 | Revision 1.0 | August 2015
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
BOSCH [ Bosch Sensortec GmbH ]
