BMA253
Data sheet
Page 61
Register 0x0E (FIFO_STATUS)
The register contains FIFO status flags.
Name
Bit
0x0E
7
FIFO_STATUS
6
5
4
Read/Write
R
R
R
R
Reset
n/a
n/a
n/a
n/a
Value
Content
fifo_overrun
fifo_frame_counter<6:4>
Bit
3
2
1
0
Read/Write
R
R
R
R
Reset
n/a
n/a
n/a
n/a
Value
Content
fifo_frame_counter<3:0>
fifo_overrun:
FIFO overrun condition has ‘1’ occurred, or ‘0’not occurred; flag can be
cleared by writing to the FIFO configuration register FIFO_CONFIG_1 only
fifo_frame_counter<6:4>:
Current fill level of FIFO buffer. An empty FIFO corresponds to
0x00. The frame counter can be cleared by reading out all frames from the
FIFO buffer or writing to the FIFO configuration register FIFO_CONFIG_1.
BST-BMA253-DS000-01 | Revision 1.0 | August 2015
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.