BMA253
Data sheet
Page 63
Register 0x11 (PMU_LPW)
Selection of the main power modes and the low power sleep period.
Name
Bit
0x11
7
PMU_LPW
6
5
4
Read/Write R/W
R/W
0
R/W
0
R/W
0
Reset
0
Value
Content
suspend
3
lowpower_en
deep_suspend
sleep_dur<3>
Bit
2
1
0
Read/Write R/W
R/W
0
R/W
0
R/W
0
Reset
0
Value
Content
sleep_dur<2:0>
reserved
suspend, low_power_en, deep_suspend:
Main power mode configuration setting {suspend; lowpower_en;
deep_suspend}:
{0; 0; 0}
{0; 0; 1}
{0; 1; 0}
{1; 0; 0}
{all other}
NORMAL mode;
DEEP_SUSPEND mode;
LOW_POWER mode;
SUSPEND mode;
illegal
Please note that only certain power mode transitions are permitted.
sleep_dur<3:0>: Configures the sleep phase duration in LOW_POWER mode:
´0000b´ to ´0101b´
´0111b´
´1001b´
´1011b´
´1101b´
0.5 ms,
2 ms,
6 ms,
25 ms,
100 ms,
1 s
´0110b´ 1 ms,
´1000b´ 4 ms,
´1010b´ 10 ms,
´1100b´ 50 ms,
´1110b´ 500 ms,
´1111b´
Please note, that all application specific settings which are not equal to the default settings
(refer to 6.2 register map), must be re-set to its designated values after DEEP_SUSPEND.
BST-BMA253-DS000-01 | Revision 1.0 | August 2015
Bosch Sensortec
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to
third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.