DEVICE SPECIFICATION
S5933
PCI CONTROLLER
4.5 REVISION IDENTIFICATION REGISTER (RID)
Register Name:
Address Offset:
Power-up value:
Boot-load:
Revision Identification
The RID register contains the revision identification
number. This field is initially cleared. Write operations
from the PCI interface have no effect on this register.
After reset is removed, this field can be boot-loaded
from the external non-volatile device (if present and
valid) so that another value may be used. Sections
7.2 and 7.3 detail the optional boot-load operation.
08h
00h
External nvRAM/EPROM offset
048h
Attribute:
Size:
Read Only
8 bits
Figure 4-5. Revision Identification Register
7
0
00h
Revision Identification Number (RO)
Table 4-6. Revision Identification Register
Bit
Description
7:0
Revision Identification Number. Initialized to zeros, this register may be loaded to the value in non-
volatile memory at offset 048h.
Applied Micro Circuits Corporation
6195 Lusk Blvd., San Diego, CA 92121 • (619) 450-9333
4-10