DEVICE SPECIFICATION
S5933
PCI CONTROLLER
4.1 VENDOR IDENTIFICATION REGISTER (VID)
The VID register contains the vendor identification
number. This number is assigned by the PCI Special
Interest Group and is intended to uniquely identify
any PCI device. Write operations from the PCI inter-
face have no effect on this register. After reset is
removed, this field can be boot-loaded from the ex-
ternal non-volatile device (if present and valid) so that
other legitimate PCI SIG members can substitute their
vendor identification number for this field. Sections 7.2
and 7.3 detail the optional boot-load operation.
Register Name:
Address Offset:
Power-up value:
Vendor Identification
00h-01h
10E8h (AMCC, Applied Micro
Circuits Corp.)
Boot-load:
External nvRAM offset
040h-41h
Attribute:
Size:
Read Only (RO)
16 bits
Figure 4-1. Vendor Identification Register
15
0
10E8h
Vendor Identification Register (RO)
Table 4-2. Vendor Identification Register
Bit
Description
15:0
Vendor Identification Number: This is a 16 bit-value assigned to AMCC.
Applied Micro Circuits Corporation
6195 Lusk Blvd., San Diego, CA 92121 • (619) 450-9333
4-4