15–2
Chapter 15: Using the Agilent 3070 Tester for In-System Programming
Agilent 3070 Development Flow without the PLD ISP Software
Agilent 3070 Development Flow without the PLD ISP Software
Programming devices with the Agilent 3070 tester (using a Serial Vector Format (.svf)
File) without Agilent’s PLD ISP software requires the following steps. Refer to
Figure 15–1.
Figure 15–1. Agilent 3070 Development Flow for In-System Programming Using SVF File without PLD ISP
Start
Create a
Step 1
Step 2
Printed Circuit Board
(PCB) and Test Fixture
Designer
Create a
Serial Vector Format
(.svf) File
Convert the SVF File to
Pattern Capture Format
(.pcf) File
Step 3
Step 4
Step 5
Create Executable
Tests from Files
Test Engineer
Compile Executable
Tests
Step 6
Debug
No
Programming
Successful?
Yes
Done
MAX II Device Handbook
© October 2008 Altera Corporation