14–6
Chapter 14: Using Jam STAPL for ISP via an Embedded Processor
Software Development
Figure 14–3. Multi-Device JTAG Chain’s Name and Sequence in Programmer Window in the Quartus II Software
Figure 14–4. Generating a JBC File for a Multi-Device JTAG Chain in the Quartus II Software
The following steps explain how to generate JBC files using the Quartus II software.
1. On the Tools menu, click Programmer.
2. Click Add File and select programming files for the respective devices.
3. On the File menu, point to Create/Update and click Create JAM, SVF, or ISC File.
See Figure 14–4.
4. Specify a Jam STAPL Byte-Code File in the File format list.
5. Click OK.
MAX II Device Handbook
© October 2008 Altera Corporation